93 sat SC2 starting issue
#1
04-07-2007 | 11:54 PM
Thread Starter
|
Junior Member
Joined: Apr 2007
Posts: 4
From: United States
I have a 1993 saturn SC2, twim cammer, auto tranny, full tank of gas. It has a problem, it cranks and cranks but won't fire.My snap-on scanner is not picking up any codes. does anyone have a solution
#2
04-08-2007 | 12:08 PM
Super Moderator
Joined: Jul 2005
Posts: 11,027
From: Slightly off center
1) Have you replaced the ECTS (engine coolant temp sensor)?
If the original is in there, replace with brass tipped design and replace connector as well. This is a must irrespective of your current issue (though it may be related)
2) Have you checked for fuel and spark (the basics)?
Could be Crank position sensor (CPS)
See the following:
https://www.saturnforum.com/forum_po...=1507&PN=1
(Ducky's post)
If the original is in there, replace with brass tipped design and replace connector as well. This is a must irrespective of your current issue (though it may be related)
2) Have you checked for fuel and spark (the basics)?
Could be Crank position sensor (CPS)
See the following:
https://www.saturnforum.com/forum_po...=1507&PN=1
(Ducky's post)
Thread
Thread Starter
Forum
Replies
Last Post
